GS MUL HP is a multipurpose nitrogen free emulsifier for high brine internal phase which works well as Primary as well as Secondary Emulsifier.
450°F
Max Temp
232°C
Fuel Volume (m³)
30%
Base Fluid (%)
60%
Max Pills
GS MUL HP offers a comprehensive suite of capabilities designed to meet the most demanding drilling fluid composition and workover operations.
Nitrogen free emulsifier designed for high internal phase applications under extreme conditions.
Works effectively with minimal continuous oil phase at low as 30% resulting in cost savings.
Compatible with high temperature emulsifier for normal oil water ratio without special fluid requirements.
Works as primary as well as secondary emulsifiers providing flexibility through the grating size.
Provides strong and stable emulsion over wide range of internal phase salinities without viscosity issues.
Adsorbs on mineral surfaces reducing interfacial surface energy and rendering materials oil wet.
Tolerant to water and drilled solids contaminations without adhesion issues or formation damage.
Facilitates smooth flow back operations with excellent oil wetting properties at higher ratios.
Can be dissolved using acid treatments when removal or cleanup is required.
Follow these simple steps for optimal fluid in oil application in your operations
GS MUL HP is compatible with all types of base oils for versatile application.
Required at dosage of 4 to 18 lb/bbl (11.4 to 45.7 kg/m³) depending on density and requirements.
Important considerations for safe and effective hole cleaning operations
GS MUL HP requires relatively higher dosage of viscosifiers when oil phase is greater than 60%. GS MUL HP with oil water ratio less than 50% oil are stable up to 250°F. Please note that this system is compatible before application to maintain optimal performance and avoid potential complications during operations.
Enquire Now
Typically replies within a day